Keep the same Mac and monitor and try a direct connection. This test removes the dock from the signal path while leaving the two main devices unchanged.


Compare the two connections


If direct works, reconnect the dock and change one component at a time. Suppose the monitor achieves its intended refresh rate directly but only 60 Hz through the dock. Compare the dock, adapter and cable limits for that resolution before buying another monitor. Review how many displays your exact Mac model supports at once.


Verify the final setup


If the direct connection is blank too, confirm power, selected input and cable fit. In Displays settings hold Option to show Detect Displays if needed. Once video returns, check the actual resolution and refresh rate and repeat the test after waking the Mac. A picture that appears once can still fail after sleep.


Use a small test matrix rather than swapping everything at once. First test Mac → display and note the input, resolution, refresh rate and whether the display is detected. Then test Mac → dock → display with the dock powered as intended. If your setup uses several monitors, repeat with a single display. A second display can change what the Mac or dock can drive at the same time.


Consider a 4K monitor that wakes reliably when plugged into the Mac but intermittently stays black through the dock. Confirm whether macOS still lists it in Displays after the failed wake. If the monitor is listed, verify the selected input and try the same connection at a lower refresh rate. If it is absent, test a known-good cable or a different compatible dock output, one change at a time. Keep the first combination that reliably wakes at your intended settings and confirm it over several sleep and wake cycles.


https://support.apple.com/en-us/102501